What Is Hydroseeding?

Your Hydroseeding Questions Answered Here

The obvious first question is, “What is hydroseeding?” Hydroseeding is a technique used in landscaping to create a lawn that is distinctive in its dark green appearance. There are specific hydroseeding supplies that must be utilized. The process begins with a mixing of grass seed and fertilizer. A mulch is then applied and the entire mixture is delivered under pressure with a hose. Sounds complicated, and it is a detailed process that should not be attempted as a do-it-yourself project. Using a professional contractor, hydroseeding can be a quick way to sow grass seed over a large area.

People find that Hydroseeding is a very simple procedure to get a yard full of grass.  The application procedure consist of mixing grass seed, hydro-mulch, fertilizer and water together in the right amounts and apply all in one quick application. The mixture varies depending on soil types, humidity, time of year and other variables. Various soil need amendments to the mixture and soil stabilizers may be needed. This is why hydroseeding should be left up to the professional trained in this process.

The Process Of Hydroseeding

There are varying forms of hydroseeding, each using some general hydroseeding supplies and some job-specific ones. All are dependent on the type of lawn the customer desires and the type of equipment that the contractor uses. The type of mulch used will depend on the equipment used by the contractor. Climate conditions, such as expected rainfall and temperature, as well as the personal preference of the landowner are all taken into consideration when planning a hydroseeded lawn.

Most basic mulches available are comprised of finely chopped up newspaper, a foaming agent, and green dye. Some mulches include wood by-products or may be a mixture of newspaper and wood. The mulch, regardless of base ingredient, is designed to be biodegradable.

The type of seed used, and the fertilizer needed for that specific type of grass, is dependent on the desires of the customer. The most common types of grasses used in this process are Bermuda, Buffalo, Zoysia, and Fescue. A lawn can be hydroseeded in the spring, fall, or early summer. The area must be cleared of all debris prior to the seeding. The soil should be tilled and any necessary fertilizers added to prepare the soil for the seeds. The surface needs to be smooth and the grades adjusted if needed. The area should be lightly packed and moistened prior to the seeding.

Aftercare Of Hydroseeding

The lawn should be lightly watered for three to four weeks after a seeding. Mowing can begin after three to four weeks, but it is best to keep traffic low for a few months to give the lawn time to become fully established. Check with your contractor for what hydroseeding supplies you’ll need to care for your lawn.